بررسی و ارزیابی پنج مدل از قطره‌چکان‌های پر‌کاربرد در سامانه‌های خردآبیاری در باغ‌های پسته

نوع مقاله : علمی پژوهشی

نویسندگان

1 مرکز تحقیقات و آموزش کشاورزی و منابع طبیعی استان سمنان( شاهرود) - ایستگاه تحقیقات پسته دامغان

2 پژوهشکده پسته ایران- رفسنجان

3 دانشگاه آزاد اسلامی واحد دامغان

10.22092/rhsj.2026.372384.1141

چکیده

براساس شرایط کیفی آب آبیاری، سطح اجرا، نحوه مدیریت و بهره‌برداری و آنالیز اقتصادی در اجرای یک طرح، انتخاب قطره‌چکان مناسب نقشی مهم در آینده‌ی بهرهبرداری از آن طرح خواهد داشت. انتخاب درست نازلهای پاششی یا انواع لولههای قطره‌چکان‌دار‌ با مکانیزم‌های خروجی دیافراگمی که هم قابلیت کنترل فشار و هم قابلیت خودشویندگی در آنها وجود دارد در کنار میزان ضریب تغییرات‌ ساخت مناسب، تضمینکننده‌ی موفقیت یک شبکه آبیاری قطره‌ای خواهد بود. بر این اساس از انواع قطره‌چکانهای پرمصرف وارداتی و تولید داخل که در سامانه‌های آبیاری قطره‌ای اجراشده در باغ‌های پسته در منطقه در طی سالهای اخیر مورد استفاده قرار گرفته‌اند، پنج نوع پرمصرف انتخاب شد. از هر کدام به تعداد 50 عدد قطره‌چکان کارنکرده و نو با فواصل یک متری به منظور اندازه گیری ضریب تغییرات ساخت بر روی لوله 16 میلی‌متری با فشار ورودی ثابت قرار داده شد. بر اساس نتایج بدست آمده، ضریب تغییرات ساخت قطره‌چکان‌های مورد بررسی A، B، C، D و E به ترتیب 6/5، 9/3، 8/3، 15 و 1/21 درصد بود که در این بین، قطره‌چکان‌های B و C با قرار گرفتن در گروه کیفی خوب، بهترین وضعیت را داشتند. میزان ضریب تغییرات ساخت بالای قطرهچکان E نیز آن را در سطح غیر‌قابل‌قبول قرارداده و استفاده از آن توصیه نمیگردد. نظر به وضعیت کیفی آب آبیاری در سطح شهرستان دامغان و مناطق پسته‌کاری آن، قطره‌چکان‌های با نوع کارکرد طولانی‌مسیر توصیه نمی شود. انتظار بر این است تا تولیدکنندگان داخلی به منظور افزایش سطح کیفی تولیدات خود، در این زمینه تلاش مضاعفی داشته باشند.

کلیدواژه‌ها

موضوعات


عنوان مقاله [English]

Evaluation and Performance Assessment of Five Commonly Used Dripper Models in Micro-Irrigation Systems of Pistachio Orchards

نویسندگان [English]

  • Mohsen Tabatabaeian 1
  • Mehdi Mohamadi Moghadam 1
  • Naser Sedaghati 2
  • Shamim Sepasi 3
1 Semnan Province Agricultural and Natural Resources Research and Education Center (Shahroud) – Damghan Pistachio Research Station
2 Iran Pistachio Research Institute – Rafsanjan
3 Islamic Azad University, Damghan Branch
چکیده [English]

Based on the quality characteristics of irrigation water, implementation scale, management and operation practices, and economic analysis of a project, the selection of an appropriate emitter plays a crucial role in the future performance of an irrigation system. Proper selection of spray nozzles or drip lines equipped with diaphragm-type outlet mechanisms, which provide both pressure regulation and self-flushing capability, along with an acceptable manufacturing coefficient of variation, ensures the success of a drip irrigation network. Accordingly, five widely used emitters—both imported and domestically manufactured—that have been applied in drip irrigation systems of pistachio orchards in the region in recent years were selected for evaluation. From each type, 50 unused and new emitters were installed at one-meter intervals on a 16-mm lateral line under constant inlet pressure in order to determine the manufacturing coefficient of variation. Based on the obtained results, the manufacturing coefficients of variation for emitters A, B, C, D, and E were 5/6%, 3/9%, 3/8%, 15%, and 21/1%, respectively. Among these, emitters B and C, classified within the good quality group, showed the most favorable performance. The high manufacturing coefficient of variation observed for emitter E placed it in the unacceptable category, and its use is therefore not recommended. Considering the irrigation water quality conditions in Damghan County and its pistachio-growing areas, long-path emitters are not recommended. It is expected that domestic manufacturers will make greater efforts to improve the quality level of their products in this regard.

کلیدواژه‌ها [English]

  • Manufacturing coefficient of variation
  • dripper
  • pressure-compensating
  • self-flushing
  • long-path